BowLift | Cylinder Ice Cube Mold Ice Cup

Features:

• Suitable For Many Occasions:You can use this silicone ice cube cup to make various beverages you like in your cups, such as whiskey, cocktails, wine, and cola. It can hold 60 ice cubes. Suitable for summer parties, hotels, restaurants, bars, picnics, and more, which will bring more fun.

• Food Grade Silicone Material：environmental protection and health,Compliant with food contact materials,soft and comfortable,easy to demold and not easy to deform

• Easy Operation: Pour it neatly into a glass,No clips,no plates to catch.Dump directly to keep the ice cubes clean all the way

• Easy Demoulding: Squeeze,easy demoulding,and decompression.Press and demould,the ice cubes fall off the inner cavity,which can be easily decompressed

How to Use:

• Step 1: Pull out the inner cylinder, pour water into the silicone container, and the position that is slightly more than 2 grids does not exceed 2 and a half grids.
• Step 2: Slowly insert the inner cylinder with the cover into the silicone cavity, pay attention to rotating it to the bottom and holding it down, and then gently squeeze the silicone side exhaust under the cover to prevent the inner cylinder from floating.
• Step 3: Snap the lid onto the ice bucket. Put in the refrigerator until all the water freezes. (4-6 hours).
• Step 4: Put the mold at room temperature for a few minutes; if you don't want to wait and press hard, you can pour an appropriate amount of hot water into the inner cylinder for about 10 seconds, pour out the hot water, and you can easily pull out the inner cylinder.Remove the cover and squeeze firmly on all sides of the outer cavity.

Specification:

• Material: food-grade silicone + ABS
• Ice cube: about 1.3cm
• Number of ice cubes: 60 cubes
• Size: about 9*8*8.5cm

Packing Include:

• 1* Cylinder Ice Cube Mold Ice Cup

• 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color which is showed in the pictures.
• 2. Please forgive a slight measuring deviation due to manual measurement.