BowLift | DIY window with magnetic screen
-
Free Shipping
-
14-Day Return Policy
-
50% OFF
-
Almost sold out
Free Shipping
🦟 Do you ever get so bored that mosquitoes, insects, cockroaches, or even mice sneak into your room? And your windows are unprotected. Here’s your chance to try our DIY Magnetic Screen Window, which keeps insects out while allowing fresh air in. No screws or drilling required; you can set it up and take it down swiftly, and the reusable protection fits any small windows or doors.
Main Features
✅️ Effective window curtain: Keeps insects at bay while allowing fresh air to enter. Compatible with all window types, including aluminum frames, wrought iron grids, sliding windows, sash windows, bathroom/toilet windows with roller blinds, and even grill gates and balconies.
✅️ Unique weather stripping for windows/doors: High-quality polyester mesh, exceptional cold resistance, oil and water-proof, good recovery, transparency, excellent elasticity, weather-resistant for daily use.
✅️ Self-adhesive magnetic for easy opening/closing: Leaves no residual tape on the door and window frame after the curtain is removed, and it can easily be reattached to the frame. If you make a mistake, you can remove it, and it will stick back effortlessly.
✅️ Adjustable screen tailored to your windows: You can modify the length and width according to the needs of your window and door. Easy to install, fits perfectly even in the smallest available spaces, and requires no hairdryer!
✅️ Reusable and simple to maintain: For regular use, just wipe it down with a damp cloth or vacuum to remove dust. For spring cleaning, simply take the window mesh off, rinse it thoroughly, then put it back on the window to air dry!
Usage Instructions
🔸1. clean the window frame
🔸2. prepare the magnetic strip to attach it to the window frame. Remove the protective film and press it onto the window frame.
🔸3. Lay and pull the remaining magnetic strips at the top. Pay attention to the orientation of the lines on the magnet.
🔸4. Cut off any excess magnetic strip.
5. remove the protective film from the top magnetic strips. This allows the adhesive to be ready for the mesh.
🔸6. Attach the mesh.
🔸7. Prepare the plastic strip to lay on top of the mesh. Remove the protective film and press it firmly onto the mesh.
🔸8. Position the corners, ensuring the top plastic strip fits into the corner.
🔸9. Cut off any excess mesh.
🔸10. Place the wind clips by peeling off the protective film. Then attach it to the surface of the bottom magnetic strip. The shielding layer (magnetic strip 2, mesh, plastic strip) is secured inside the clip.
Specifications
| Material |
|
|---|---|
| Product weight |
|
| Product size |
|
| Package contents | Mesh piece × 1 Roll of magnetic strip × 1 PVC strip on a roll × 1 Corner holders × 4 Fast clamps × 2 |
Note: 🔸 Due to manual measurements
🔸 Please allow slight dimension deviations due to manual measurements.
🔸 Due to different screen and lighting effects, the actual color of the item may vary slightly from the color shown in the picture.
If you have any questions about our products or your order, please send an email to support@bowlift.com. Our customer service team typically responds within 30 minutes!
Returns to Canada
All returns must be sent to our warehouse in Canada:
Warehouse Dock 51400 Parkhurst Square #1
Brampton, ON L6T 5H5
Canada
Please note: We do NOT offer free returns for this product
